Microphone Cases
Warehouse cleanout sale
We have a limited supply of microphone flight cases, in various styles. See descriptions below for size and compatibility information.
Style 10: Tube mic case
Designed for common Asian tube mic with power supply, shockmount, cables. Fits Alctron T11A, Apex 460, BadAax T11A, Carvin CTM-100, MicParts 12-251 and V-47. This case might not accommodate some shockmount designs -- definitely will NOT accommodate metal-frame "spider" style shockmounts.
These cases are several years old and might have cosmetic blemishes. We are unable to "pick a good one" for you; we are selling these for cheap to clear space.
This case ships in an 18x14x8 inch carton. This website will under-charge for shipping if you live anywhere other than the west coast; we would contact you for an additional shipping payment if necessary.
Style 11: 60mm mic case
Designed for 60mm (diameter) microphones, with our "Cutaway" shockmount. Fits a MicParts LDC with room to spare (which means you might need to put a piece of foam in next to it so the mic doesn't move). MicParts LDCs measure ~50mm diameter. Also fits the MicParts S3 series mics (60mm diameter body).
This case is several years old, and has cosmetic blemishes. Due to its size (the shipping carton would be 12x12x6 inches), the website will likely undercharge for shipping for any address not on the west coast. We would contact you for an additional small shipping payment if necessary.
Style 7: 60mm single mic case
This is a newer version of the "Style 11" case. It fits 60mm x 200mm microphones. It will hold the MicParts/Roswell Cutaway shockmount, available separately. The images on this page show the exterior and interior of the actual case we have; both inside and outside have cosmetic blemishes, but the case itself has never been used.
External dimensions (inches): 11 x 10.5 x 5
Due to its size (the shipping carton would be 12x12x6 inches), the website will likely undercharge for shipping for any address not on the west coast. We would contact you for an additional small shipping payment if necessary.
Style 3: Tube mic case, blemished
This case fits the Avantone CV-12, Apex 460, BadAax T11A and similar Chinese-style tube mics. It holds the power supply and a shockmount.
External dimensions (inches): 16.5 x 12 x 5.5
Style 4: 60mm single mic case (Rycote compatible), blemished
This case fits 60mm x 200mm microphones. It will hold the Rycote USM-VB shockmount, available separately.
External dimensions (inches): 11 x 10.5 x 5
Style 5: 60mm single mic case (Rycote compatible), new / "A stock"
This case fits 60mm x 200mm microphones. It will hold the Rycote USM-VB shockmount, available separately.
External dimensions (inches): 11 x 10.5 x 5
Style 6: SKB 50mm pair case (Rycote compatible), new / "A stock"
We made these prototype cases for demo use, although never actually used them. The case is SKB's 1813-7. The foam was laser-cut to hold:
- two 50mm mics such as MicParts' T-12, T-47, T-67, S-12, S-87, S-47
- two Rycote USM-L shockmounts
- Rycote windscreen
- two swivel mounts
We used 2-layer foam; the top layer is more durable, while the second layer is softer and more absorbent for shock absorption.
Note - due to size, this case (#6) cannot be shipped outside the US.
Please remember that shipping carriers (UPS, FedEx) calculate shipping cost based primarily on dimensions, not weight. We will rebate excess shipping costs whenever possible.
Original: $28.00
-70%$28.00
$8.40
Description
Warehouse cleanout sale
We have a limited supply of microphone flight cases, in various styles. See descriptions below for size and compatibility information.
Style 10: Tube mic case
Designed for common Asian tube mic with power supply, shockmount, cables. Fits Alctron T11A, Apex 460, BadAax T11A, Carvin CTM-100, MicParts 12-251 and V-47. This case might not accommodate some shockmount designs -- definitely will NOT accommodate metal-frame "spider" style shockmounts.
These cases are several years old and might have cosmetic blemishes. We are unable to "pick a good one" for you; we are selling these for cheap to clear space.
This case ships in an 18x14x8 inch carton. This website will under-charge for shipping if you live anywhere other than the west coast; we would contact you for an additional shipping payment if necessary.
Style 11: 60mm mic case
Designed for 60mm (diameter) microphones, with our "Cutaway" shockmount. Fits a MicParts LDC with room to spare (which means you might need to put a piece of foam in next to it so the mic doesn't move). MicParts LDCs measure ~50mm diameter. Also fits the MicParts S3 series mics (60mm diameter body).
This case is several years old, and has cosmetic blemishes. Due to its size (the shipping carton would be 12x12x6 inches), the website will likely undercharge for shipping for any address not on the west coast. We would contact you for an additional small shipping payment if necessary.
Style 7: 60mm single mic case
This is a newer version of the "Style 11" case. It fits 60mm x 200mm microphones. It will hold the MicParts/Roswell Cutaway shockmount, available separately. The images on this page show the exterior and interior of the actual case we have; both inside and outside have cosmetic blemishes, but the case itself has never been used.
External dimensions (inches): 11 x 10.5 x 5
Due to its size (the shipping carton would be 12x12x6 inches), the website will likely undercharge for shipping for any address not on the west coast. We would contact you for an additional small shipping payment if necessary.
Style 3: Tube mic case, blemished
This case fits the Avantone CV-12, Apex 460, BadAax T11A and similar Chinese-style tube mics. It holds the power supply and a shockmount.
External dimensions (inches): 16.5 x 12 x 5.5
Style 4: 60mm single mic case (Rycote compatible), blemished
This case fits 60mm x 200mm microphones. It will hold the Rycote USM-VB shockmount, available separately.
External dimensions (inches): 11 x 10.5 x 5
Style 5: 60mm single mic case (Rycote compatible), new / "A stock"
This case fits 60mm x 200mm microphones. It will hold the Rycote USM-VB shockmount, available separately.
External dimensions (inches): 11 x 10.5 x 5
Style 6: SKB 50mm pair case (Rycote compatible), new / "A stock"
We made these prototype cases for demo use, although never actually used them. The case is SKB's 1813-7. The foam was laser-cut to hold:
- two 50mm mics such as MicParts' T-12, T-47, T-67, S-12, S-87, S-47
- two Rycote USM-L shockmounts
- Rycote windscreen
- two swivel mounts
We used 2-layer foam; the top layer is more durable, while the second layer is softer and more absorbent for shock absorption.
Note - due to size, this case (#6) cannot be shipped outside the US.
Please remember that shipping carriers (UPS, FedEx) calculate shipping cost based primarily on dimensions, not weight. We will rebate excess shipping costs whenever possible.